Inglewood is a dense, working city, and that means the electrical calls here look different from one property to the next. A single-family home built in the 1950s carries different wiring challenges than a newer multi-unit building where several tenants are charging electric vehicles and running high-draw appliances at the same time. Coleman Electrical Service handles all of it, from a single dead outlet to a full panel replacement, and we are available every day from 6:00 AM to 10:00 PM.
The range of property types here means no two calls are identical. Older homes may have wiring that was never designed for today's loads. Apartment buildings and commercial units have their own code requirements and their own patterns of wear. We work across all of it, and the approach is always the same: find the actual problem, explain what it takes to fix it, and get the work done correctly.
Electrical problems in a densely built city often trace back to age and load, not to anything dramatic. A breaker that trips whenever the microwave and the air conditioning run at the same time is telling you the circuit is undersized for what's on it. An outlet that stopped working in a bedroom, a light fixture that flickers under load, a switch that buzzes when it's on: each of these has a cause, and finding it requires working through the circuit rather than guessing.
We trace faults from the symptom back to the source. That might mean testing outlets for proper grounding, pulling the cover off a switch that's showing signs of arcing, or checking the panel for a breaker that is failing to hold its rating. GFCI and AFCI protection gets checked and installed where California code requires it, because a fault in one location can point to a broader issue elsewhere on the same circuit.
A lot of Inglewood's housing stock was wired for a fraction of the electrical load a household carries today. A 100-amp panel that was adequate when the home was built often cannot support a modern kitchen, an EV charger circuit, and a central air conditioning circuit all drawing at the same time. When a panel is full, when breakers are tripping under normal use, or when a home inspection flags the service as undersized, a panel upgrade is the right answer.
We handle panel replacements, 200-amp service upgrades, and subpanel installation for properties that need load distributed to a detached structure or a converted space. Every upgrade starts with a load calculation so the new equipment is sized for what the property is actually running. Code-compliant wiring on every job means the work passes inspection without a callback.
New circuits, new outlets, new fixtures, ceiling fan wiring: installation work in a city this size comes from a wide range of situations. A landlord preparing a unit for a new tenant. A homeowner adding a home office that needs dedicated circuits. A small business rewiring a retail space for a different layout. The situation shapes the job, and we work through it the same way each time: assess what's there, confirm what's needed, and do the work to code.
The full breakdown of what we handle is on the services page. Call for a quote and we'll go through what your specific job involves.
It is a common situation: the power goes out in part of a home or a unit, and it is not immediately clear whether the fault is inside the property or somewhere on the utility's side of the meter. The answer matters, because the fix is completely different depending on where the problem sits.
When we come out, we work through a clear sequence. We check the panel first, then the circuits that have lost power, then the connections at the meter base. If the fault is inside the property, we find it and fix it. If the evidence points to the utility's equipment, such as a failed transformer or a problem on the service drop, we tell you that clearly and explain what the next step is with your utility provider. We do not leave you guessing about which side of the line the problem is on.
We show up, and we keep you posted until the job is done.
Same-day appointments are often available when you call between 6:00 AM and 10:00 PM. We cannot promise a specific arrival window in advance, but when something stops working and it cannot wait, let us know when you call and we will prioritize accordingly.
For tenants and businesses that need to stay operational, we work around the situation. If a repair requires shutting down a circuit, we confirm in advance which parts of the property will be affected and for how long. For multi-unit buildings, we coordinate with whoever is on-site so the work does not create more disruption than necessary. The goal is to get the problem fixed without turning the visit into a bigger event than it needs to be.
Pick up the phone and we'll get rolling.
If you are working out what the job needs, the electrical services page goes through it.
Homes built in the late 1960s and 1970s were sometimes wired with aluminum branch-circuit wiring rather than copper. Aluminum expands and contracts differently from the devices it connects to, which loosens connections over time and creates a fire risk at outlets, switches, and fixtures. Remediation does not always mean rewiring the entire home. In many cases, the right fix is installing approved connectors at every device location and replacing outlets and switches with units rated for aluminum wiring. We assess what is actually there before recommending a scope.
When the grid restores power after an outage or a public-safety shutoff, the voltage spike that comes back through the line can damage appliances, electronics, and EV charger circuits. A whole-home surge protector installs at the main panel and intercepts that spike before it reaches anything plugged in. We check grounding and bonding as part of the installation, because the protector works best when the grounding system behind it is solid. For properties in this region where grid interruptions during wildfire season are a recurring reality, it is a straightforward installation that protects a significant amount of equipment.
A safety inspection gives a clear picture of what a property's electrical system actually looks like. For homeowners preparing to sell, for buyers who want to know what they are taking on, and for landlords bringing a rental unit up to code, an inspection is the starting point. We document what we find, explain what needs attention, and separate the genuine safety concerns from the items that are simply dated. Work that follows an inspection is code-compliant and documented.
California's EV adoption rate means a Level 2 home charger has moved from an upgrade to a practical necessity for a lot of households. A Level 2 unit runs on a dedicated 240-volt circuit and charges most vehicles overnight. We assess the panel's available capacity, run the dedicated circuit, and install the charger in the right location. If the panel needs room to support the new circuit, we handle that as part of the same project. The price is confirmed on the call before anything is scheduled.
GFCI outlets are required in kitchens, bathrooms, garages, and exterior locations, and a lot of older Inglewood homes are missing them in at least one of those areas. We install GFCI and AFCI protection where code requires it and where it adds a genuine layer of safety. Outlet and switch replacement is also a common call after a remodel, when a tenant moves out and a landlord is refreshing a unit, or when a device has simply worn out and stopped holding a plug reliably.
When a garage, a detached workshop, or a converted outbuilding needs its own electrical supply, a subpanel is usually the right answer. Rather than running individual circuits from the main panel, a subpanel gives the structure its own distribution point and makes it easier to add capacity later. We size the subpanel for what the space is actually going to run, not just what it needs today, and we handle the feeder wiring from the main panel through to the new subpanel. Work carried out by licensed electricians means the installation meets California's requirements for detached structures.
The price for a job depends on what the job actually involves. A straightforward outlet replacement is a different scope from running a new dedicated circuit through a finished wall in a multi-unit building. When you call, we ask about the property and what you are seeing, and from that conversation we give you a price before anything is scheduled.
If the job turns out to be more involved than the initial call suggested, we tell you before continuing and confirm the revised price. You get a straight answer on what the work covers and what would change the quote. There are no charges added after the fact without your knowledge.
Honest recommendations on repairs, never an upsell. If a repair is the right answer, that is what we will recommend. If the wiring or equipment genuinely needs to be replaced, we will explain why and what it involves, and you make the call from there.
We cover Inglewood and the surrounding communities throughout Los Angeles County. That includes Lennox, Westmont, View Park-Windsor Hills, Hawthorne, and Del Aire. Whether the property is a single-family home, a multi-unit rental building, or a commercial space, we cover the area and same-day service is often available.
Call (747) 368-2289 for a quote or to check availability. We are open every day from 6:00 AM to 10:00 PM. We'll handle the wiring so you don't have to.
It is a good idea to keep pets out of the work area. Tools, open wall cavities, and de-energized circuits are all hazards for an animal that wanders into the space. We do not require the whole property to be cleared, just the rooms where the work is happening.
Yes, significantly. Knowing whether a breaker trips at a specific time of day, when a particular appliance is running, or only when multiple things are on at once gives us a much clearer starting point for diagnosis. Patterns narrow down whether the cause is a failing device, an overloaded circuit, or a wiring problem.
Older properties here commonly surface aluminum branch-circuit wiring, undersized panels that cannot carry today's electrical loads, and missing GFCI protection in kitchens and bathrooms. Arc-fault breakers are also absent in many older homes, even though they are now required in bedrooms and living areas under California code. A safety inspection identifies what is actually there so you know what needs attention and what can wait.
Yes. Multi-unit buildings and commercial properties are a regular part of what we handle in a city this size. The work follows the same process regardless of property type: a clear assessment, a price confirmed before we schedule, and code-compliant wiring throughout. If the building needs to stay operational during the work, we coordinate around that from the start.
Unlicensed wiring done by a previous occupant is something we run into in older properties. We assess whether it is safe to leave in place, whether it can be corrected, or whether it needs to come out entirely. We explain the options and the reasoning before any decision is made.
We schedule commercial work at times that minimize disruption to operations. That might mean early morning, evening, or weekend scheduling depending on when the business is quietest. We discuss the timing when we scope the job and confirm the schedule before anything is booked.
We explain what we found and break it down into what poses an immediate safety risk, what is a code deficiency that should be corrected, and what is worth monitoring. That gives you a clear picture of what needs attention now and what can be scheduled. You decide how to proceed from there.
Most repair and installation work can be done while a property is occupied. We coordinate with whoever is on site, limit the time any circuit is de-energized, and clean up before we leave. Work that requires extended power interruptions is scheduled at a time that works for the tenant.
It helps to have a clear path to the panel so the electrician can get to it without moving stored items. If the panel is in a closet, garage, or utility area that is stacked with belongings, clearing a few feet of space around it before the visit saves time.
A group of dead outlets in one area often points to a tripped GFCI outlet that has cut power to others downstream, a tripped breaker, or a loose connection at the first outlet in the run. We check all three before assuming the wiring itself is the problem.
If there is something in your home or your building that has been on the list for a while, today is as good a day as any to get it looked at. Coleman Electrical Service is available every day from 6:00 AM to 10:00 PM, and same-day appointments are often available.
Call (747) 368-2289 for a quote. You will get a price on the call before anything is scheduled, and we will take it from there.
Neighboring towns we serve: Hawthorne, Culver City, Florence-Graham, Huntington Park, Torrance.
Browse our map of areas.
Below is a plain-language look at the electrical services we handle across Inglewood and the surrounding San Fernando Valley. Each row covers what the service includes, who it fits best, and a practical note to help you figure out where to start. Call for a quote and we will walk you through the details before anything is scheduled.
| Service Type | Scope of Work | Best For | Things to Know |
|---|---|---|---|
| Hot-Tub Circuits | 240-volt dedicated circuit, GFCI disconnect installation, outdoor wiring and conduit, bonding and grounding | Homeowners installing a spa or hot tub and needing the electrical side handled correctly | Hot tub wiring involves specific code requirements for GFCI protection and bonding. Getting it right the first time avoids problems at inspection. |
| Breaker & Fuse Repair | failing breaker replacement, fuse panel evaluation, overcurrent protection checks, panel interior inspection | Homeowners with a breaker that trips repeatedly or will not reset | A breaker that keeps tripping is doing its job, but the underlying cause still needs to be found and corrected. |
| Standby Battery for Outages | battery backup wiring, transfer switch installation, critical load panel setup, grid-tie and off-grid configurations | Homeowners who want power for essential circuits when the grid goes down | Sizing the battery correctly starts with knowing which circuits you need to keep running. We work through that on the call before anything is scheduled. |
| Electrical Repairs & Troubleshooting | tracing faults to the source, testing outlets and circuits, arcing and loose connection repair, GFCI and AFCI protection | Any home or business with a symptom that needs a diagnosis | A tripping breaker or dead outlet can point to something deeper. We identify the real problem before recommending a fix. |
| Outlet & Switch Installation | GFCI outlet installation, switch replacement and upgrade, dedicated outlet runs, exterior and weatherproof outlets | Homeowners adding outlets or replacing devices that have stopped working | GFCI protection is required by California code in kitchens, bathrooms, garages, and outdoor locations. We install to current code on every job. |
| Older-Home Rewiring | knob-and-tube replacement, aluminum branch-circuit remediation, partial and whole-home rewires, wiring for additions and remodels | Owners of older Inglewood properties with wiring that has been flagged or is showing symptoms | The scope of a rewire depends on what is actually in the walls. We assess the existing wiring before recommending a full or partial approach. |
| Whole-Home Surge Protection | panel-mounted surge protector installation, grounding and bonding verification, protection for appliances and electronics, EV charger circuit protection | Any home with sensitive electronics, an EV charger, or solar equipment worth protecting | A surge protector at the panel intercepts voltage spikes before they reach your devices. Grounding and bonding are checked as part of the installation. |
| Wiring & Circuit Installation | new circuit runs, renovation and addition wiring, garage and shed wiring, code-compliant rough-in work | Additions, conversions, and any space being built out or rewired | New wiring in California is inspected to code. We handle the load calculation and panel capacity check as part of the project. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, panel replacement, subpanel installation, load calculations and grounding | Older homes, properties under renovation, or any panel flagged during an inspection | Many Inglewood homes were built with 100-amp service. A load calculation before the upgrade confirms the new panel can carry what you are adding. |
| Electrical Safety Inspections | panel and wiring condition review, GFCI and AFCI check, grounding and bonding evaluation, pre-sale and rental unit inspections | Landlords, buyers, sellers, and anyone with an older property | A written summary of findings comes with every inspection so you know exactly what was found and what, if anything, needs attention. |
| Dedicated Appliance Circuits | dryer and range circuits, hot tub and spa wiring, workshop and garage circuits, disconnect and breaker installation | Any high-draw appliance that needs its own breaker and wire run | Running a dedicated circuit means the appliance does not compete with other loads on the same breaker, which reduces nuisance tripping and wear. |
| Lighting Installation | recessed and LED lighting, kitchen and bathroom lighting, exterior and security lighting, landscape lighting circuits | Remodels, new construction, or any space where the existing lighting is not working for the room | Exterior and landscape lighting circuits need proper weatherproofing and grounding. We handle the circuit run, not just the fixture. |
| Solar & Battery Backup | transfer switch installation, battery backup wiring, panel capacity and interconnection work, critical load circuit setup | Homeowners adding solar or battery storage, especially ahead of wildfire season outages | Public-safety power shutoffs across Los Angeles County have made battery backup a practical choice. We handle the electrical side so the system actually works when the grid goes down. |
| Ceiling Fan Installation | fan and fixture swap, new circuit and wiring runs, box and brace installation, switch and remote wiring | Homeowners replacing an old fan or adding one where no wiring exists | If there is no existing wiring at the ceiling location, we run the circuit from the panel. No guesswork on whether the box can hold the weight. |
| EV Charger Installation | Level 2 charger installation, dedicated 240-volt circuit, panel capacity check, garage and driveway placement | Electric vehicle owners who need faster overnight charging than a standard outlet provides | California has some of the highest EV adoption in the country. If the panel needs room for the new circuit, we handle that as part of the same visit. |
Call (747) 368-2289 for a quote on any of the services above. We are available every day from 6:00 AM to 10:00 PM, and we will walk you through the details before anything is scheduled.
(747) 368-2289