Something usually tips it. A breaker that trips a second time in the same week. An outlet that stopped working and nobody can explain why. A switch that sparks when you flip it. Coleman Electrical Service handles those calls for Huntington Park homeowners, landlords, and businesses, and we're available every day from 6:00 AM to 10:00 PM. Same-day appointments are often available when you call.
Huntington Park is a city where a lot of the housing was built decades ago, and the electrical systems in many of those homes were not designed for what people run through them today. Older wiring, undersized panels, and circuits that were added without documentation are common. We work through all of it, from a single dead outlet to a full panel replacement, and the price is confirmed before any work starts. Call (747) 368-2289 to get a quote.
We know a tenant cannot always wait three days, and a business that loses power to part of its space needs someone out quickly. When you call, we ask what is going on and where the problem seems to be. From that conversation we give you a price before anything is scheduled, and we confirm when someone can come out.
Same-day service is often available. For situations that will not keep, such as a sparking outlet, a burning smell near a panel, or a complete loss of power in part of a building, let us know when you call. Those get priority. We show up, and we keep you posted until the job is done.
For rental properties and occupied commercial spaces, we work around tenants and operating hours where we can. The goal is to get the problem resolved without making the space unusable for longer than necessary.
Getting your power back is easier than you think, and the jobs people put off are often simpler to handle than they expect. A socket that has never worked since you moved in, a switch that takes two tries to connect, an outdoor light that has been flickering for months. Each one is worth a call rather than a wait.
The reason to call is not just convenience. A switch that sparks is arcing. An outlet that feels warm to the touch is carrying more resistance than it should. An outdoor fixture that flickers in wet weather may have a wiring connection that is letting moisture in. None of those get better on their own, and the longer they run, the more likely they are to cause a bigger problem.
We test every circuit. We label every breaker. We leave it safe.
Workshop equipment draws a lot of current, and most homes and small commercial spaces were not wired with that in mind. A welder, an air compressor, or a large table saw needs its own dedicated circuit, sized correctly for the load it pulls. We run load calculations before any of this work starts, so the circuit and the panel capacity are matched to what the equipment actually requires. If the panel needs room to support a new circuit, that gets addressed as part of the same project.
A detached garage or outbuilding that needs power is a wiring run from the main panel, and it has to be done correctly from the ground up. That means the right wire gauge, proper burial depth or conduit where required, and a subpanel in the outbuilding if multiple circuits are needed. Electric gate operators need a dedicated supply and, in many cases, a disconnect installed at the gate itself. We handle the full electrical side of these installations, including the subpanel work and the circuit runs.
A panel where half the breakers are unlabelled or labelled wrong is a safety issue and a practical problem. When something trips, nobody knows which breaker to look at. When a tenant calls with a problem, nobody can tell which circuit feeds the affected room. We go through the panel systematically, trace each circuit, test it, and label it accurately. For older Huntington Park properties where wiring has been modified over the decades, this process sometimes turns up circuits that were added without documentation, and we flag those for review.
Lighting installation covers a wider range than most people expect. Replacing a fixture is straightforward. Running a new circuit for recessed LED lighting in a room that has never had it involves cutting into the ceiling, fishing wire, and connecting back to the panel. Dimmer installation requires checking that the existing wiring is compatible. We handle all of it, and we make sure GFCI and AFCI protection is in place where California code requires it. Code-compliant wiring on every job means the work passes inspection and does not need to be redone.
Pricing is straightforward and explained up front. When you call, we ask about the job and give you a rate before anything is booked. If the job turns out to be more involved than the initial call suggested, we tell you before continuing and confirm the revised price. You are not presented with a bill that does not match what you were told.
What changes a quote is usually access or scope. Wiring that runs through finished walls or ceilings takes longer to trace and replace than wiring in an open garage. A panel upgrade that also requires a service-entrance upgrade is a larger project than a panel swap alone. We explain what is involved and why before the work starts, so you can make an informed decision.
Ask what the quote covers and you will get a straight answer. The full breakdown of what each type of job involves is on the service page.
There is more on the electrical details page.
Electrical problems don't wait, and neither do we, which is why fault finding is one of the most common calls we take in this area. Older housing stock means wiring that has been extended, modified, and sometimes repaired in ways that were not documented. A circuit that trips without explanation, an outlet that has no power despite the breaker being on, a fixture that buzzes. We trace the problem back to its source rather than addressing only the visible symptom.
A city with housing stock from the mid-twentieth century has a lot of panels that were sized for a different era. When a homeowner adds an EV charger, a battery backup system, or a large appliance, the panel often cannot carry the additional load without an upgrade. We handle 200-amp service upgrades, subpanel installation, and the service-entrance work that a solar or battery system requires on the electrical side. Every upgrade starts with a load calculation.
Not every electrician works the same way, and installation work in Huntington Park covers a wide range. Ceiling fans where there was no ceiling box before. Outdoor security lighting at a rental property. A whole-home surge protector at the panel to protect against voltage spikes when the grid restores after an outage. EV charger installation on a dedicated 240-volt circuit. Backup generator hookup with a proper transfer switch so the generator feeds the panel safely. We handle the electrical side of all of it. The service page carries the full breakdown of what each installation involves.
We serve Huntington Park and the surrounding communities throughout Los Angeles County, including Walnut Park, Vernon, Florence-Graham, Maywood, and Bell. Whether the job is in a single-family home, a rental property, or a commercial building, we cover the area and same-day service is often available.
If you are not sure whether we reach your address, call (747) 368-2289 and we will confirm on the call.
Work on the meter base or the service entrance involves the utility company as well as the electrician. We handle the electrical side, including the service entrance wiring and the panel connections, and we coordinate with the utility on the parts that require their involvement. We explain how that process works when we scope the job.
It depends on what was done and whether it can be brought to code without starting over. Some amateur work can be corrected at the connection points and made safe. Other installations have to come out because the wiring method, the wire gauge, or the routing does not meet current code. We assess it honestly and explain what the options are.
A workshop with power tools, compressors, or welding equipment typically needs dedicated circuits sized for the load of each major tool, and sometimes a subpanel to distribute that load cleanly. Standard 15-amp or 20-amp outlets are not adequate for equipment that draws heavy startup current. We calculate what the space needs and wire it accordingly.
Older properties in this area frequently have panels that are undersized for current loads, circuits that were extended or modified without documentation, and wiring that has never been inspected. Knob-and-tube wiring is still present in some of the oldest housing stock, and aluminum branch-circuit wiring turns up in homes built in certain decades. An electrical safety inspection gives you a clear picture of what is actually in the walls before a problem forces the issue.
We explain what we found and break it down into what poses an immediate safety risk, what is a code deficiency that should be corrected, and what is worth monitoring. That gives you a clear picture of what needs attention now and what can be scheduled. You decide how to proceed from there.
Pool pumps, underwater lighting, and similar equipment require dedicated circuits, GFCI protection, and bonding of all metal components near the water. The bonding requirement is separate from grounding and is specifically designed to prevent shock hazard in and around the water. We handle the circuit, the GFCI protection, and the bonding as a complete installation.
In the Los Angeles area, where public-safety power shutoffs during wildfire season and grid restoration events are a recurring reality, a surge protector at the panel is a practical investment. It intercepts voltage spikes before they reach appliances, electronics, and EV charger circuits. We check grounding and bonding as part of the installation, because the protector works best when the system behind it is solid. Work is carried out by licensed electricians, and honest recommendations on repairs, never an upsell, is how we approach every call.
Unlicensed wiring done by a previous occupant is something we run into in older properties. We assess whether it is safe to leave in place, whether it can be corrected, or whether it needs to come out entirely. We explain the options and the reasoning before any decision is made.
Yes. Rental properties and multi-unit buildings are a regular part of what we handle. We work around tenants where we can, and we approach code compliance the same way on a rental as on an owner-occupied home. If a pre-tenancy inspection or a code correction is needed, we can walk through what is involved and confirm a price on the call.
Coleman Electrical Service is available every day from 6:00 AM to 10:00 PM, and same-day appointments are often available for Huntington Park calls. Fast diagnosis. Honest pricing. Clean work.
Call (747) 368-2289 for a quote. You will get a price on the call, confirmed before anything is scheduled, and we will take it from there.
Neighboring towns we serve: Florence-Graham, Inglewood, Hawthorne, Culver City.
Browse our map of areas.
Below is a plain-language look at the electrical services we handle across Huntington Park and the surrounding San Fernando Valley. Each row covers what the service includes, who it fits best, and a practical note to help you figure out where to start. Call for a quote and we will walk you through the details before anything is scheduled.
| Service Type | Scope of Work | Best For | Things to Know |
|---|---|---|---|
| Hot-Tub Circuits | 240-volt dedicated circuit, GFCI disconnect installation, outdoor wiring and conduit, bonding and grounding | Homeowners installing a spa or hot tub and needing the electrical side handled correctly | Hot tub wiring involves specific code requirements for GFCI protection and bonding. Getting it right the first time avoids problems at inspection. |
| Breaker & Fuse Repair | failing breaker replacement, fuse panel evaluation, overcurrent protection checks, panel interior inspection | Homeowners with a breaker that trips repeatedly or will not reset | A breaker that keeps tripping is doing its job, but the underlying cause still needs to be found and corrected. |
| Standby Battery for Outages | battery backup wiring, transfer switch installation, critical load panel setup, grid-tie and off-grid configurations | Homeowners who want power for essential circuits when the grid goes down | Sizing the battery correctly starts with knowing which circuits you need to keep running. We work through that on the call before anything is scheduled. |
| Electrical Repairs & Troubleshooting | tracing faults to the source, testing outlets and circuits, arcing and loose connection repair, GFCI and AFCI protection | Any home or business with a symptom that needs a diagnosis | A tripping breaker or dead outlet can point to something deeper. We identify the real problem before recommending a fix. |
| Outlet & Switch Installation | GFCI outlet installation, switch replacement and upgrade, dedicated outlet runs, exterior and weatherproof outlets | Homeowners adding outlets or replacing devices that have stopped working | GFCI protection is required by California code in kitchens, bathrooms, garages, and outdoor locations. We install to current code on every job. |
| Older-Home Rewiring | knob-and-tube replacement, aluminum branch-circuit remediation, partial and whole-home rewires, wiring for additions and remodels | Owners of older Huntington Park properties with wiring that has been flagged or is showing symptoms | The scope of a rewire depends on what is actually in the walls. We assess the existing wiring before recommending a full or partial approach. |
| Whole-Home Surge Protection | panel-mounted surge protector installation, grounding and bonding verification, protection for appliances and electronics, EV charger circuit protection | Any home with sensitive electronics, an EV charger, or solar equipment worth protecting | A surge protector at the panel intercepts voltage spikes before they reach your devices. Grounding and bonding are checked as part of the installation. |
| Wiring & Circuit Installation | new circuit runs, renovation and addition wiring, garage and shed wiring, code-compliant rough-in work | Additions, conversions, and any space being built out or rewired | New wiring in California is inspected to code. We handle the load calculation and panel capacity check as part of the project. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, panel replacement, subpanel installation, load calculations and grounding | Older homes, properties under renovation, or any panel flagged during an inspection | Many Huntington Park homes were built with 100-amp service. A load calculation before the upgrade confirms the new panel can carry what you are adding. |
| Electrical Safety Inspections | panel and wiring condition review, GFCI and AFCI check, grounding and bonding evaluation, pre-sale and rental unit inspections | Landlords, buyers, sellers, and anyone with an older property | A written summary of findings comes with every inspection so you know exactly what was found and what, if anything, needs attention. |
| Dedicated Appliance Circuits | dryer and range circuits, hot tub and spa wiring, workshop and garage circuits, disconnect and breaker installation | Any high-draw appliance that needs its own breaker and wire run | Running a dedicated circuit means the appliance does not compete with other loads on the same breaker, which reduces nuisance tripping and wear. |
| Lighting Installation | recessed and LED lighting, kitchen and bathroom lighting, exterior and security lighting, landscape lighting circuits | Remodels, new construction, or any space where the existing lighting is not working for the room | Exterior and landscape lighting circuits need proper weatherproofing and grounding. We handle the circuit run, not just the fixture. |
| Solar & Battery Backup | transfer switch installation, battery backup wiring, panel capacity and interconnection work, critical load circuit setup | Homeowners adding solar or battery storage, especially ahead of wildfire season outages | Public-safety power shutoffs across Los Angeles County have made battery backup a practical choice. We handle the electrical side so the system actually works when the grid goes down. |
| Ceiling Fan Installation | fan and fixture swap, new circuit and wiring runs, box and brace installation, switch and remote wiring | Homeowners replacing an old fan or adding one where no wiring exists | If there is no existing wiring at the ceiling location, we run the circuit from the panel. No guesswork on whether the box can hold the weight. |
| EV Charger Installation | Level 2 charger installation, dedicated 240-volt circuit, panel capacity check, garage and driveway placement | Electric vehicle owners who need faster overnight charging than a standard outlet provides | California has some of the highest EV adoption in the country. If the panel needs room for the new circuit, we handle that as part of the same visit. |
Call (747) 368-2289 for a quote on any of the services above. We are available every day from 6:00 AM to 10:00 PM, and we will walk you through the details before anything is scheduled.
(747) 368-2289