When something goes wrong with the wiring in your home or building, the first question is usually whether the repair is straightforward or whether someone is about to tell you the whole system needs to come out. That second opinion matters. Coleman Electrical Service covers San Fernando, and when we come out, we start by finding out what is actually going on rather than arriving with a predetermined scope.
Work is carried out by licensed electricians who give you a clear read on what the problem is and what it takes to fix it. Whether you are a homeowner dealing with a circuit that stopped working, or a property manager trying to get a unit back in shape before a tenant moves in, the process is the same: diagnose it, explain it, price it before anything starts.
San Fernando is a small city with a dense residential core and a mix of housing that spans several decades of construction. A call from here is rarely the same as the last one. Older homes may have panels that were never sized for modern loads, wiring that has been extended and modified over the years without documentation, and outlets that were added long after the original build. Newer construction and renovated properties bring their own demands: EV charger circuits, battery backup wiring, and smart home installations that require circuits and capacity the original build did not anticipate.
The kind of problem that leads to a call varies just as much. The full breakdown of what we handle is on the service page, but the situations that come up most often here fall into a few clear categories.
A dead outlet, a breaker that trips whenever the microwave runs, or lights that flicker when the dryer kicks on are all symptoms of something that needs to be traced. We work from the symptom back to the source. That might be a loose connection at a junction box, a failing breaker, a circuit that is carrying more load than it was designed for, or a grounding issue that is causing problems throughout the home. We do not patch over symptoms and move on.
Many homes in San Fernando were built when a 100-amp panel was considered adequate. That is not the case for a household running central air conditioning, an electric vehicle charger, and a modern kitchen simultaneously. When the panel is the constraint, we handle full replacements and service upgrades, subpanel installation for properties where load needs to be distributed, and the grounding and bonding work that has to be done correctly alongside any panel job. We run a load calculation before recommending a scope so the new equipment is sized for what you are actually running.
Adding a circuit where there is not one, running wiring for a new appliance, or upgrading lighting throughout a home are all installation jobs that start with a plan. We handle recessed and LED lighting, exterior and security lighting, ceiling fans, outlets, and switches. For EV charger installation, we assess the panel's available capacity, run the dedicated 240-volt circuit, and install the charger. If the panel needs room to carry the new circuit, that gets handled as part of the same project.
San Fernando's residential properties cover a range of configurations. Some homes have panels in attached garages with clear access. Others have equipment tucked into hallways, utility closets, or older basement-style spaces where access is tighter. In multi-unit buildings, panels may be stacked in a shared utility room, with individual unit breakers mixed in with building-wide circuits.
Knowing where the panel is and what condition the access is in helps a visit go smoothly. When you call, let us know if access is restricted, if the panel is in a shared space that needs to be coordinated with other tenants, or if there is a second panel or subpanel somewhere else on the property. That information shapes how the visit is scheduled and what we bring.
We show up, and we keep you posted until the job is done.
San Fernando's housing stock and the way properties get used here means certain job types come up regularly. Here is what each of them actually involves.
Electric ranges, wall ovens, and dryers all require dedicated 240-volt circuits. If you are replacing a gas appliance with an electric one, or adding an appliance to a space that was never wired for it, that circuit needs to be run from the panel. We size the wire and breaker to match the appliance load and confirm the panel has capacity before we start.
Low-voltage work covers doorbell wiring, data runs for home offices and media rooms, and rough-in for security cameras and intercom systems. These jobs often get bundled with a larger project, such as a renovation or a room addition, but they can also stand alone. Getting the rough-in done before walls are closed saves significant time later.
Running power to a structure that is not attached to the main building requires its own circuit, its own disconnect, and in many cases a subpanel. We handle the full run: trenching for underground conduit where needed, the subpanel installation, and the circuits inside the outbuilding. Electric gate operators need a dedicated circuit and proper grounding, and we handle that side of the installation.
A whole-home surge protector installs at the main panel and intercepts voltage spikes from the grid before they reach appliances, electronics, and EV charger circuits. In a region where public-safety power shutoffs and grid restoration events are a recurring reality, it protects a significant amount of equipment. We check grounding and bonding as part of the installation because the protector works best when the system behind it is solid. We give honest recommendations on repairs, never an upsell, and this is one that genuinely earns its place.
Replacing a standard switch with a smart switch or a dimmer is a straightforward job, but it is not always as simple as swapping one for the other. Older wiring may not include a neutral wire at the switch box, which some smart switches require. We check what is in the box before recommending a specific device and wire it correctly so it works reliably.
The specifics for a job like this are on our wiring guide.
When you call, we ask what is going on and where the problem seems to be. From that conversation, we give you a price before anything is scheduled. The rate covers the work described on the call, and if the job turns out to be more involved than the initial description suggested, we tell you before we continue and confirm the revised price. You make the call from there.
What changes a quote is usually access or scope. A circuit that runs through a finished wall takes longer than one in an open ceiling. A panel that has been modified multiple times over the decades may take more time to trace and document than a straightforward replacement. If something like that comes up during the visit, we explain it before it affects the price.
Code-compliant wiring on every job means the work is done to California's current requirements. If a repair or upgrade requires bringing older wiring or devices up to code, we address that as part of the job and explain what is involved before anything starts. Pick up the phone and we'll get rolling.
Same-day appointments are often available when you call between 6:00 AM and 10:00 PM. We are available every day of the week, including weekends. If a problem will not keep, such as a sparking outlet, a burning smell near the panel, or a complete loss of power to part of the building, let us know when you call and we will prioritize accordingly.
For rental properties and businesses that need to stay operational, we work around what the situation allows. A tenant does not need to vacate for most repair calls. A business does not need to close for a panel inspection or a circuit addition. We confirm the details on the call and schedule in a way that works for whoever is on site.
Reach out and an electrician will follow up.
We serve San Fernando and the surrounding communities throughout Los Angeles County, including Sun Valley, Burbank, Santa Clarita, Stevenson Ranch, and La Crescenta-Montrose. Whether the job is in a single-family home, a multi-unit building, or a commercial property, we cover the area and can often get someone out the same day.
Work is carried out by licensed electricians who know what California code requires and what properties in this part of the county typically need.
Most electrical work creates minimal mess. Outlet and switch work involves opening boxes that are already there. Work that requires running new wiring through finished walls involves more disruption, and we explain the access points needed before the job starts. We clean up the work area before we leave.
Yes, we give you a price on the call before anything is scheduled. We ask what you are seeing and where the problem seems to be, and from that we can tell you what the job covers and what it will cost. If the work turns out to be more involved than the call suggested, we tell you before continuing.
It is a good idea to keep pets out of the work area. Tools, open wall cavities, and de-energized circuits are all hazards for an animal that wanders into the space. We do not require the whole property to be cleared, just the rooms where the work is happening.
When wiring is buried in a finished ceiling, a concrete slab, or a wall cavity that cannot be opened, we assess whether the existing run can be tested and reused, whether a new route is available, or whether surface-mounted conduit is the right solution. We explain the options before any work begins.
Most repair and installation work can be done while a property is occupied. We coordinate with whoever is on site, limit the time any circuit is de-energized, and clean up before we leave. Work that requires extended power interruptions is scheduled at a time that works for the tenant.
Homes built several decades ago commonly turn up undersized panels, aluminum branch-circuit wiring, missing GFCI protection in kitchens and bathrooms, and circuits that have been extended or modified without documentation. None of those are unusual, and each has a straightforward path to resolution. A safety inspection is often the fastest way to get a clear picture of what the system actually looks like before deciding what to address.
We explain what we found and break it down into what poses an immediate safety risk, what is a code deficiency that should be corrected, and what is worth monitoring. That gives you a clear picture of what needs attention now and what can be scheduled. You decide how to proceed from there.
Sometimes, yes. It depends on how much capacity the existing panel has and whether there is an open breaker slot of the right size. We check the panel's available capacity before recommending a scope. If the panel can support the new circuit without an upgrade, we say so. If it cannot, we explain what the upgrade involves and confirm the price before any work starts.
Pool pumps, underwater lighting, and similar equipment require dedicated circuits, GFCI protection, and bonding of all metal components near the water. The bonding requirement is separate from grounding and is specifically designed to prevent shock hazard in and around the water. We handle the circuit, the GFCI protection, and the bonding as a complete installation.
No. If a problem returns after we have worked on it, we treat that as a callback on the original job rather than a separate service call. We find out whether the original repair was incomplete or whether a related issue has surfaced, and we address it.
Work on the meter base or the service entrance involves the utility company as well as the electrician. We handle the electrical side, including the service entrance wiring and the panel connections, and we coordinate with the utility on the parts that require their involvement. We explain how that process works when we scope the job.
Permit requirements depend on the type and scope of the work. A straightforward outlet replacement typically does not require a permit, but panel replacements, service upgrades, and new circuit runs often do. Requirements can also vary depending on whether the work affects the main service or a subpanel. When you call, we talk through what the job involves and confirm what applies before anything is scheduled.
Coleman Electrical Service is available every day from 6:00 AM to 10:00 PM. Fast diagnosis. Honest pricing. Clean work.
If you have an electrical problem that needs attention in San Fernando, Burbank, Santa Clarita, or anywhere nearby, call (747) 368-2289 for a quote. You will get a price on the call before anything is booked, and we will take it from there.
Neighboring towns we serve: Santa Clarita, La Crescenta-Montrose, West Hollywood, Beverly Hills.
Browse our map of areas.
Below is a plain-language look at the electrical services we handle across San Fernando and the surrounding San Fernando Valley. Each row covers what the service includes, who it fits best, and a practical note to help you figure out where to start. Call for a quote and we will walk you through the details before anything is scheduled.
| Service Type | Scope of Work | Best For | Things to Know |
|---|---|---|---|
| Hot-Tub Circuits | 240-volt dedicated circuit, GFCI disconnect installation, outdoor wiring and conduit, bonding and grounding | Homeowners installing a spa or hot tub and needing the electrical side handled correctly | Hot tub wiring involves specific code requirements for GFCI protection and bonding. Getting it right the first time avoids problems at inspection. |
| Breaker & Fuse Repair | failing breaker replacement, fuse panel evaluation, overcurrent protection checks, panel interior inspection | Homeowners with a breaker that trips repeatedly or will not reset | A breaker that keeps tripping is doing its job, but the underlying cause still needs to be found and corrected. |
| Standby Battery for Outages | battery backup wiring, transfer switch installation, critical load panel setup, grid-tie and off-grid configurations | Homeowners who want power for essential circuits when the grid goes down | Sizing the battery correctly starts with knowing which circuits you need to keep running. We work through that on the call before anything is scheduled. |
| Electrical Repairs & Troubleshooting | tracing faults to the source, testing outlets and circuits, arcing and loose connection repair, GFCI and AFCI protection | Any home or business with a symptom that needs a diagnosis | A tripping breaker or dead outlet can point to something deeper. We identify the real problem before recommending a fix. |
| Outlet & Switch Installation | GFCI outlet installation, switch replacement and upgrade, dedicated outlet runs, exterior and weatherproof outlets | Homeowners adding outlets or replacing devices that have stopped working | GFCI protection is required by California code in kitchens, bathrooms, garages, and outdoor locations. We install to current code on every job. |
| Older-Home Rewiring | knob-and-tube replacement, aluminum branch-circuit remediation, partial and whole-home rewires, wiring for additions and remodels | Owners of older San Fernando properties with wiring that has been flagged or is showing symptoms | The scope of a rewire depends on what is actually in the walls. We assess the existing wiring before recommending a full or partial approach. |
| Whole-Home Surge Protection | panel-mounted surge protector installation, grounding and bonding verification, protection for appliances and electronics, EV charger circuit protection | Any home with sensitive electronics, an EV charger, or solar equipment worth protecting | A surge protector at the panel intercepts voltage spikes before they reach your devices. Grounding and bonding are checked as part of the installation. |
| Wiring & Circuit Installation | new circuit runs, renovation and addition wiring, garage and shed wiring, code-compliant rough-in work | Additions, conversions, and any space being built out or rewired | New wiring in California is inspected to code. We handle the load calculation and panel capacity check as part of the project. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, panel replacement, subpanel installation, load calculations and grounding | Older homes, properties under renovation, or any panel flagged during an inspection | Many San Fernando homes were built with 100-amp service. A load calculation before the upgrade confirms the new panel can carry what you are adding. |
| Electrical Safety Inspections | panel and wiring condition review, GFCI and AFCI check, grounding and bonding evaluation, pre-sale and rental unit inspections | Landlords, buyers, sellers, and anyone with an older property | A written summary of findings comes with every inspection so you know exactly what was found and what, if anything, needs attention. |
| Dedicated Appliance Circuits | dryer and range circuits, hot tub and spa wiring, workshop and garage circuits, disconnect and breaker installation | Any high-draw appliance that needs its own breaker and wire run | Running a dedicated circuit means the appliance does not compete with other loads on the same breaker, which reduces nuisance tripping and wear. |
| Lighting Installation | recessed and LED lighting, kitchen and bathroom lighting, exterior and security lighting, landscape lighting circuits | Remodels, new construction, or any space where the existing lighting is not working for the room | Exterior and landscape lighting circuits need proper weatherproofing and grounding. We handle the circuit run, not just the fixture. |
| Solar & Battery Backup | transfer switch installation, battery backup wiring, panel capacity and interconnection work, critical load circuit setup | Homeowners adding solar or battery storage, especially ahead of wildfire season outages | Public-safety power shutoffs across Los Angeles County have made battery backup a practical choice. We handle the electrical side so the system actually works when the grid goes down. |
| Ceiling Fan Installation | fan and fixture swap, new circuit and wiring runs, box and brace installation, switch and remote wiring | Homeowners replacing an old fan or adding one where no wiring exists | If there is no existing wiring at the ceiling location, we run the circuit from the panel. No guesswork on whether the box can hold the weight. |
| EV Charger Installation | Level 2 charger installation, dedicated 240-volt circuit, panel capacity check, garage and driveway placement | Electric vehicle owners who need faster overnight charging than a standard outlet provides | California has some of the highest EV adoption in the country. If the panel needs room for the new circuit, we handle that as part of the same visit. |
Call (747) 368-2289 for a quote on any of the services above. We are available every day from 6:00 AM to 10:00 PM, and we will walk you through the details before anything is scheduled.
(747) 368-2289