Most electrical problems start with something small: a breaker that trips once, an outlet that goes quiet, a light that flickers when the refrigerator kicks on. The sensible move is to check the obvious things first, reset the breaker, swap the bulb, try a different circuit. When that does not fix it, or when the same symptom keeps coming back, that is the point where calling a licensed electrician is the right call. Coleman Electrical Service handles electrical work across Culver City, from quick repairs to full panel upgrades and new installations, and we are available every day from 6:00 AM to 10:00 PM.
Same-day appointments are often available. When you call, you get a price before anything is scheduled, and the work is carried out by licensed electricians who will tell you what they found and what it takes to fix it. Whether you are dealing with something that stopped working this morning or planning an upgrade you have been putting off, call (747) 368-2289 and we will get you a quote.
Apartments and condos in Culver City come with their own version of electrical problems, and the setup is often different from a single-family home. The main panel may be in a hallway, a utility room, or a common area outside the unit itself. That changes how a fault gets traced and who has access to what.
Inside the unit, we handle everything on the tenant or owner side: outlets, switches, lighting, ceiling fans, GFCI protection in kitchens and bathrooms, and dedicated circuits for appliances that need their own breaker. If the issue traces back to a shared panel or a building-side supply, we explain what we found and who to contact about the parts that fall outside the unit.
For landlords managing multiple units, an electrical safety check before a new tenant moves in is a straightforward way to catch anything that needs attention before it becomes an urgent call. We give honest recommendations on repairs, never an upsell.
A business that has to stay open cannot approach an electrical job the way a homeowner can. Shutting down a retail floor or a production area for a full day is not always an option, and the work has to be planned around that. We handle commercial electrical work across Culver City with that in mind: scheduling out-of-hours where the operation requires it, keeping part of a site live while work proceeds on another section, and coordinating the full scope in advance so the work fits around the business.
Commercial panel upgrades, three-phase wiring, dedicated circuits for equipment, and commercial lighting installation all follow a different code standard than residential work. We run through the load requirements before the job starts, confirm what the existing service can carry, and plan the work so the site is not left in a state that stops business from running.
For businesses that cannot take a daytime outage, we can schedule work for evenings or weekends within our available hours. Let us know the constraints when you call and we will work around them. Reach out and an electrician will follow up.
When something stops working and it cannot wait, same-day availability is often there. Call between 6:00 AM and 10:00 PM, explain what is happening, and we will tell you what the schedule looks like. For situations involving a sparking outlet, a burning smell near a panel, or a complete loss of power in part of the building, say so when you call. Those get priority.
For tenants and businesses that need to stay open during the visit, we work around the space. The electrician will confirm what access is needed and what, if anything, will need to be temporarily shut off. You get a clear picture of what the visit involves before anyone arrives.
We show up, and we keep you posted until the job is done.
Culver City's housing stock covers a wide range, from older homes that have been through several rounds of renovation to newer construction and multi-unit buildings. The work we take on reflects that range. Here are the specific job types that come up most often.
An outdoor outlet that is not properly weatherproofed is a code issue and a safety one. We install GFCI-protected exterior outlets with the right enclosures for exposed locations, whether that is a backyard, a side yard, a patio, or an exterior wall of a commercial building. If the outlet is going somewhere that gets direct rain or spray, the enclosure and the circuit protection both have to be right.
A Level 2 EV charger needs a dedicated 240-volt circuit, and the panel has to have room to support it. We assess the available panel capacity, run the circuit, and install the charger in the right location. If the panel is already carrying a full load, we talk through what a panel upgrade involves before anything is scheduled. EV adoption across the Los Angeles area means this is one of the most common installation requests we handle, and the electrical side of it is straightforward when it is planned correctly.
Running power to a detached structure is its own project. It requires a dedicated circuit or subpanel, proper burial depth for underground conduit, and weatherproof connections at the structure end. Electric gate operators, workshop circuits, and shed lighting all fall into this category. We handle the full electrical run from the main panel to the structure, including grounding at the detached building.
Intermittent problems are the hardest to catch because they do not show up on demand. A breaker that trips occasionally, an outlet that works most of the time, a light that dims under certain conditions: each one points to something that needs to be traced rather than guessed at. We test the circuit, check connections, and look at the panel before drawing a conclusion. Code-compliant wiring on every job means that when a repair is made, it is made correctly rather than patched over.
If the scope is still open, our electrical service guide is the place to start.
When you call, you describe what is going on and we give you a price before anything is scheduled. That price covers the work as described on the call. If the job turns out to be more involved than the initial conversation suggested, such as wiring that is harder to access than expected or a related problem found during the visit, we tell you before continuing and confirm the revised scope.
There are no charges added after the fact without your knowledge. What changes a quote is a change in what the job actually involves, and that gets discussed on the spot rather than appearing on an invoice later. Ask what is included when you call and you will get a straight answer.
Not every electrical call in Culver City looks the same. The situation that leads to a call shapes the whole job, and that is worth understanding before you pick up the phone.
A repair call starts with a symptom: something stopped working, something is behaving oddly, or something is making a sound or smell it should not. The electrician traces it to the source, explains what is there, and fixes it. If the fault points to a broader issue, such as aluminum wiring that needs remediation or a panel that is not handling its load, that gets flagged as part of the same visit.
A panel upgrade is typically driven by one of three things: the existing panel is full and there is no room for new circuits, the panel itself is failing or outdated, or a new load such as an EV charger or a battery backup system requires more capacity than the current service can supply. We size the new panel based on what the property is actually running, not a generic estimate. Grounding and bonding get done as part of the job.
New installations cover a wide range: recessed and LED lighting, ceiling fans, surge protection at the panel, backup generator hookups, and dedicated circuits for major appliances. Each one starts with a clear scope and a price confirmed before any work begins. The service page carries the full breakdown of what we handle. We'll handle the wiring so you don't have to.
We serve Culver City and the surrounding communities throughout Los Angeles County. That includes Los Angeles, Ladera Heights, View Park-Windsor Hills, Marina del Rey, and Inglewood. If your address is nearby and you are not sure whether we cover it, call (747) 368-2289 and we will confirm on the spot.
Coverage is not a question of distance from any one point. If you are in Culver City or a neighboring community, we can get someone out to you. Same-day availability applies across the area we serve, not just in one part of it.
Pick up the phone and we'll get rolling.
Yes. We schedule out-of-hours work for businesses that need to stay operational during normal hours, within our available window of 6:00 AM to 10:00 PM. When you call, let us know the constraints and we will plan the job around them. The scope and the price are confirmed before anyone shows up.
No. If a problem returns after we have worked on it, we treat that as a callback on the original job rather than a separate service call. We find out whether the original repair was incomplete or whether a related issue has surfaced, and we address it.
A momentary dip in brightness when a refrigerator compressor, an air conditioner circuit, or a large motor starts is caused by the startup current draw pulling voltage down briefly on a shared circuit. If the dimming is significant or lasts more than a moment, it can point to an undersized service, a weak connection, or a circuit that needs to be dedicated. We can assess whether the cause is normal or worth addressing.
It helps to have a clear path to the panel so the electrician can get to it without moving stored items. If the panel is in a closet, garage, or utility area that is stacked with belongings, clearing a few feet of space around it before the visit saves time.
A shared service means the main meter and service entrance feed more than one panel. Work on one unit's panel does not affect the others, but any change to the service entrance or the metering arrangement involves the utility and may affect the other units. We assess the setup before recommending any work that touches the shared portion.
Unlicensed wiring done by a previous occupant is something we run into in older properties. We assess whether it is safe to leave in place, whether it can be corrected, or whether it needs to come out entirely. We explain the options and the reasoning before any decision is made.
The utility controls the portion of the supply from the street to the meter. We handle everything from the meter base into the home, including the service entrance conductors, the main disconnect, and the panel. When the utility's involvement is required, we explain what needs to happen on their end and what we handle on ours.
A group of dead outlets in one area often points to a tripped GFCI outlet that has cut power to others downstream, a tripped breaker, or a loose connection at the first outlet in the run. We check all three before assuming the wiring itself is the problem.
A panel and circuit inspection across the units is a practical starting point. It identifies which units have GFCI protection where it is required, whether any circuits are overloaded, and whether the main panel has capacity for anything that is planned. That gives you a clear picture of what needs attention rather than waiting for a tenant to report a problem.
Yes, in practical ways. Older properties in the area sometimes have aluminum branch-circuit wiring or panels that were sized for a lighter load than they are now carrying. Newer construction and recent renovations tend to surface different issues, such as circuits that were added without proper documentation or panels that are already full before a new load is added. The work varies by property, and a diagnostic visit is often the fastest way to find out what is actually there.
Coleman Electrical Service is available every day from 6:00 AM to 10:00 PM, and same-day appointments are often available across Culver City and the surrounding area. Fast diagnosis. Honest pricing. Clean work.
Call (747) 368-2289. You will get a price on the call, before anything is booked, and the work does not begin until that price is confirmed.
Neighboring towns we serve: Inglewood, Beverly Hills, Santa Monica.
Browse our map of areas.
Below is a plain-language look at the electrical services we handle across Culver City and the surrounding San Fernando Valley. Each row covers what the service includes, who it fits best, and a practical note to help you figure out where to start. Call for a quote and we will walk you through the details before anything is scheduled.
| Service Type | Scope of Work | Best For | Things to Know |
|---|---|---|---|
| Hot-Tub Circuits | 240-volt dedicated circuit, GFCI disconnect installation, outdoor wiring and conduit, bonding and grounding | Homeowners installing a spa or hot tub and needing the electrical side handled correctly | Hot tub wiring involves specific code requirements for GFCI protection and bonding. Getting it right the first time avoids problems at inspection. |
| Breaker & Fuse Repair | failing breaker replacement, fuse panel evaluation, overcurrent protection checks, panel interior inspection | Homeowners with a breaker that trips repeatedly or will not reset | A breaker that keeps tripping is doing its job, but the underlying cause still needs to be found and corrected. |
| Standby Battery for Outages | battery backup wiring, transfer switch installation, critical load panel setup, grid-tie and off-grid configurations | Homeowners who want power for essential circuits when the grid goes down | Sizing the battery correctly starts with knowing which circuits you need to keep running. We work through that on the call before anything is scheduled. |
| Electrical Repairs & Troubleshooting | tracing faults to the source, testing outlets and circuits, arcing and loose connection repair, GFCI and AFCI protection | Any home or business with a symptom that needs a diagnosis | A tripping breaker or dead outlet can point to something deeper. We identify the real problem before recommending a fix. |
| Outlet & Switch Installation | GFCI outlet installation, switch replacement and upgrade, dedicated outlet runs, exterior and weatherproof outlets | Homeowners adding outlets or replacing devices that have stopped working | GFCI protection is required by California code in kitchens, bathrooms, garages, and outdoor locations. We install to current code on every job. |
| Older-Home Rewiring | knob-and-tube replacement, aluminum branch-circuit remediation, partial and whole-home rewires, wiring for additions and remodels | Owners of older Culver City properties with wiring that has been flagged or is showing symptoms | The scope of a rewire depends on what is actually in the walls. We assess the existing wiring before recommending a full or partial approach. |
| Whole-Home Surge Protection | panel-mounted surge protector installation, grounding and bonding verification, protection for appliances and electronics, EV charger circuit protection | Any home with sensitive electronics, an EV charger, or solar equipment worth protecting | A surge protector at the panel intercepts voltage spikes before they reach your devices. Grounding and bonding are checked as part of the installation. |
| Wiring & Circuit Installation | new circuit runs, renovation and addition wiring, garage and shed wiring, code-compliant rough-in work | Additions, conversions, and any space being built out or rewired | New wiring in California is inspected to code. We handle the load calculation and panel capacity check as part of the project. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, panel replacement, subpanel installation, load calculations and grounding | Older homes, properties under renovation, or any panel flagged during an inspection | Many Culver City homes were built with 100-amp service. A load calculation before the upgrade confirms the new panel can carry what you are adding. |
| Electrical Safety Inspections | panel and wiring condition review, GFCI and AFCI check, grounding and bonding evaluation, pre-sale and rental unit inspections | Landlords, buyers, sellers, and anyone with an older property | A written summary of findings comes with every inspection so you know exactly what was found and what, if anything, needs attention. |
| Dedicated Appliance Circuits | dryer and range circuits, hot tub and spa wiring, workshop and garage circuits, disconnect and breaker installation | Any high-draw appliance that needs its own breaker and wire run | Running a dedicated circuit means the appliance does not compete with other loads on the same breaker, which reduces nuisance tripping and wear. |
| Lighting Installation | recessed and LED lighting, kitchen and bathroom lighting, exterior and security lighting, landscape lighting circuits | Remodels, new construction, or any space where the existing lighting is not working for the room | Exterior and landscape lighting circuits need proper weatherproofing and grounding. We handle the circuit run, not just the fixture. |
| Solar & Battery Backup | transfer switch installation, battery backup wiring, panel capacity and interconnection work, critical load circuit setup | Homeowners adding solar or battery storage, especially ahead of wildfire season outages | Public-safety power shutoffs across Los Angeles County have made battery backup a practical choice. We handle the electrical side so the system actually works when the grid goes down. |
| Ceiling Fan Installation | fan and fixture swap, new circuit and wiring runs, box and brace installation, switch and remote wiring | Homeowners replacing an old fan or adding one where no wiring exists | If there is no existing wiring at the ceiling location, we run the circuit from the panel. No guesswork on whether the box can hold the weight. |
| EV Charger Installation | Level 2 charger installation, dedicated 240-volt circuit, panel capacity check, garage and driveway placement | Electric vehicle owners who need faster overnight charging than a standard outlet provides | California has some of the highest EV adoption in the country. If the panel needs room for the new circuit, we handle that as part of the same visit. |
Call (747) 368-2289 for a quote on any of the services above. We are available every day from 6:00 AM to 10:00 PM, and we will walk you through the details before anything is scheduled.
(747) 368-2289