Sun Valley Electrical Company is the electrician Sun Valley homeowners and commercial clients call when the work matters and cutting corners is not an option. From a dead outlet that stopped working overnight to a full panel upgrade that brings an older home up to the demands of modern life, we handle the full range of electrical work, residential and commercial alike. We are available every day from 7:30 AM to 9:30 PM, so whether a repair comes up on a weekday or the weekend, there is a real path to getting it handled. Breakers that hold. Outlets that work. Lights that stay on.
Dealing with a tripping breaker or a dead outlet? Those are the calls we get most often, and they are also the ones where getting a clear diagnosis early matters most. A breaker that keeps tripping could be a simple overload or a sign that the circuit is undersized for what it is feeding. A dead outlet might be a tripped GFCI somewhere upstream, a loose wire at the device, or a break in the circuit. Flickering lights, burning smells at a receptacle, or outlets that feel warm to the touch all point to conditions that need a proper look before they become something worse.
When we troubleshoot, we trace the problem to its source rather than swapping parts until something works. That means checking the circuit from the panel to the device, testing for shorts, identifying overloads, and confirming that GFCI and AFCI protection is in place where code requires it. Both GFCI and AFCI breakers do specific jobs: ground-fault protection at wet locations, arc-fault protection on bedroom and living area circuits. If a repair call turns up a gap in that coverage, we flag it and explain what adding it involves. Reach out and we'll get it diagnosed.
Wiring is easier to deal with when somebody explains it plainly, and panel work is where that matters most. A lot of Sun Valley homes were built in an era when a 100-amp service was more than enough. A household running an EV charger, a home office, a washer and dryer, and central air is pulling a load that older panels were never sized to carry. When the panel cannot keep up, breakers trip under normal use, circuits run warm, and adding anything new becomes a guessing game about what the system can handle.
A panel upgrade starts with a load calculation: how much the household or business draws, what is being added, and what size service the utility connection can support. From there, the scope covers breaker panel replacement, a 200-amp service upgrade where needed, and in some cases a subpanel to serve a garage, a workshop, or a converted space. The service entrance and meter outlet get checked as part of the same visit if the utility requires it. You get the price on the call before anything is scheduled, and clear communication from the first call to the final test is how we work through every job.
When the electrician arrives, the real work begins, and on a rewire that means a thorough look at what is actually inside the walls before any plan is made. Sun Valley has a range of housing ages, and the wiring found in older homes varies widely. Knob-and-tube wiring, common in homes built before the 1950s, lacks a ground conductor and was not designed for the loads a modern household puts on it. Aluminum branch-circuit wiring, installed in many homes built during the late 1960s and early 1970s, requires specific devices and connections to perform safely over time. Both conditions are addressable, and the approach depends on what is there and what the home needs.
Whole-home rewiring replaces the branch circuits throughout the house, bringing the wiring up to current standards for grounding, bonding, and circuit protection. Dedicated circuits are part of the same conversation: a dryer, a range, a refrigerator on its own circuit, and 240-volt outlets where large appliances need them. Outlet and switch work runs alongside any rewire or as a standalone call: GFCI outlets at kitchens, bathrooms, garages, and exterior locations, AFCI protection on bedroom circuits, USB outlets where they are useful, and dimmer switches where the fixture supports them. Wiring work checked against code before sign-off is standard on every job we do.
Sun Valley sits in a part of Los Angeles County where the housing stock covers a wide range of construction eras. Postwar tract homes from the late 1940s and 1950s sit alongside mid-century builds and more recent construction, and the electrical systems inside them reflect that range. Older homes often still carry the original service entrance and panel, sized for a time when a household ran far fewer circuits and drew far less load. Wiring methods, grounding practices, and device types all changed significantly across those decades.
That range of conditions means the diagnostic step at the start of a job is not a formality. What a 1952 bungalow needs and what a 1975 split-level needs are different conversations, and the scope of the work follows from what is actually found rather than from a standard package. Panel capacity, wiring type, grounding continuity, and the condition of the service entrance are all things that get checked and explained before any work is agreed.
Doing electrical work right matters, and we'll help you get it right, especially on the finish work that changes how a space looks and functions day to day. Recessed lighting in a kitchen or living area, under-cabinet lighting at a workspace, exterior fixtures at an entry or garage, security lighting on a motion sensor, landscape lighting along a path or driveway: each of these is a wiring job that starts at the panel and ends at the fixture, and getting it right means planning the circuit before the first hole is cut.
Ceiling fan installation is a common call, whether it is replacing an existing fixture or adding a fan where there was only a light before. A fan that is being added where no box exists requires a rated ceiling box and, in most cases, a switch leg run from the wall. LED fixtures throughout save energy and reduce heat load in rooms that get warm in Southern California summers. One call and we are on it.
We treat your home the way we would want ours treated, and that is especially true on the upgrades that involve the most planning. A Level 2 EV charger installation is more than running a wire: it means confirming the panel has the capacity for a 240-volt, 50-amp circuit, identifying where the charger will be mounted, and routing the wiring cleanly from the panel to the garage or driveway. The price for that work is confirmed on the call, and it covers the circuit, the outlet or hardwired connection, and any panel work needed to support it.
Backup generator hookup and transfer switch installation give a home a reliable path through a power outage. The transfer switch is the critical piece: it isolates the home from the utility grid before the generator comes online, which protects both the equipment and anyone working on the lines outside. Whole-home surge protection installs at the panel and catches voltage spikes before they reach the appliances, electronics, and wiring throughout the house. No pressure and no gimmicks, just safe, solid wiring. Residential wiring. Commercial wiring. One number for both.
Calling an electrician doesn't have to be stressful, even for a commercial job with a schedule to keep. We work with property managers, business owners, and contractors on office electrical work, retail fit-outs, commercial panel upgrades, and the added circuits that a new piece of equipment or a business expansion requires. A new tenant moving into a space often needs circuits that the previous occupant did not, and getting that capacity added cleanly and on a workable timeline is a straightforward call to make. Let us handle the panel and the permits.
An electrical safety inspection is a methodical check of the system from the panel out: the condition of the breakers, the grounding and bonding at the panel and throughout the home, arc-fault and ground-fault protection on the circuits that require it, the state of visible wiring in the attic, crawlspace, and garage, and the condition of outlets and switches throughout. It is useful before a home purchase, after a renovation, or when an older property has not had a professional look at the system in some time. We are a local electrician for homeowners who want to know what they are working with before a problem shows up.
Wiring is easier to deal with when somebody explains it plainly, and that starts with knowing the area. We serve Sun Valley as our primary base and take calls across Los Angeles County, including Pacoima, Arleta, Panorama City, North Hollywood, Burbank, and Sylmar. Whether the job is a single-family home in the Valley or a commercial space closer to the city, the process is the same: the scope is confirmed on the call, the price follows from that, and the work is scheduled from there. We are available every day from 7:30 AM to 9:30 PM.
Sun Valley has a wide range of housing ages, from postwar tract homes to mid-century builds, and the wiring inside them reflects that history. Knowing what is common in this part of Los Angeles County, from older panels to aluminum branch circuits to two-prong outlets that have never been updated, shapes how we scope a job and what we look for when we arrive.
We explain what we find before any work begins and check in if the job turns up something that changes the scope. Clear communication from the first call to the final test is how we work through every job, so you are not left guessing about what is happening or what it will cost.
If a breaker, device, or component is not available on the visit, we explain what is needed, when it can be sourced, and what the follow-up visit will involve. We do not leave a job in an unsafe condition while waiting for a part.
When you call, we go through the scope of the job, confirm the address, and give you a rate before anything is scheduled. You know what the visit covers and what it costs before the electrician arrives.
We work in the spaces we need to access and leave them the way we found them. If a job involves cutting into a wall or ceiling, we explain what that involves and what the opening will look like when the work is done before any cutting starts.
A flickering light in a 1955 home with knob-and-tube wiring is a different job than the same symptom in a 1985 home with a modern panel. The wiring type, the panel condition, the grounding, and the circuit history all affect what the fault actually is and what fixing it involves.
Sun Valley Electrical Company handles the full range of electrical work for homes and businesses across Sun Valley and the surrounding communities. From a tripping breaker to a panel upgrade, from a single outlet to a whole-home rewire, the path to getting it done starts with a call.
Call (747) 368-2289 to get a quote and find out what is available. No guesswork. No shortcuts. No loose ends.
(747) 368-2289