Rental properties in Hawthorne keep electricians busy in ways that owner-occupied homes do not. A landlord managing several units needs code-compliant wiring after a tenant moves out, GFCI protection that will pass an inspection, and a panel that can handle the load without tripping breakers on a Friday night. Coleman Electrical Service handles that kind of work across Hawthorne, and we do it on a schedule that works around occupied units and turnaround timelines.
We're available every day from 6:00 AM to 10:00 PM, and same-day appointments are often available. Whether the call comes from a property manager dealing with a dead circuit in a rental or a homeowner whose panel is full, we show up, we explain what we find, and we get it fixed. Call (747) 368-2289 and we'll get you a price before anything is scheduled.
When you call, the first thing we do is talk through what is going on. From that conversation we give you a price before any visit is scheduled, so you know what the job covers and what it costs before you commit. Pricing is explained up front and in plain terms. If you have questions about what is included, ask on the call and you will get a straight answer.
What changes a quote is usually what we find when we get there. A repair that turns out to involve wiring inside a finished wall, or a panel that has more going on than the initial description suggested, can add to the scope. If that happens, we tell you before we continue and confirm the revised price. You are not handed a bill that is larger than what was discussed.
For landlords and property managers, we can also talk through what a unit inspection is likely to surface before we arrive, so the estimate is as accurate as possible from the start. We give honest recommendations on repairs, never an upsell.
Electrical work in Hawthorne covers a wide range of job types, and the right approach depends on the situation rather than a fixed menu. The jobs below come up regularly across the city's mix of rental units, older homes, garages, and commercial spaces.
A whole-home surge protector installs at the main panel and intercepts voltage spikes from the grid before they reach appliances, electronics, and EV charger circuits. In a region where public-safety power shutoffs and grid restoration events are a recurring fact of life, it is a practical installation that protects a significant amount of equipment. Grounding and bonding are checked as part of the job, because the protector performs best when the system behind it is solid.
When a garage or outbuilding needs real power, a subpanel is usually the right answer. It distributes load where it is needed without running individual circuits back to the main panel for every outlet and fixture. We size the subpanel to what the space will actually run, whether that is basic lighting and outlets or a workshop with heavier equipment.
Low-voltage work covers the rough-in for doorbells, intercoms, data ports, and structured wiring. It is work that tends to come up during renovations or when a rental unit is being brought up to date, and it is worth doing at the same time as any other electrical work in the walls.
A service upgrade replaces the incoming electrical service and the main panel to increase the total capacity of the home. It is the right call when the existing service cannot carry what the property needs, whether that is an EV charger circuit, added circuits for a remodel, or simply a panel that is full and has no room to grow. We run a load calculation first to make sure the upgrade is sized correctly.
Exterior outlets need weatherproof covers and GFCI protection to meet code, and they need to be installed correctly to hold up over time. We install outdoor outlets and enclosures for patios, driveways, and exterior walls, and we run the circuit back to a properly protected breaker.
Properties with irrigation systems or pump equipment need dedicated circuits sized for the load. We run those circuits, wire the disconnect, and make sure the panel has the capacity to support them without affecting other circuits in the home.
We'll handle the wiring so you don't have to.
Hawthorne has housing stock that spans several generations, and older properties can carry wiring that was never designed for the loads a household runs today. Knob-and-tube wiring, where it is still in place, creates problems when it is loaded heavily or when insulation has been added around it. Aluminum branch-circuit wiring, common in homes built during a specific period of the mid-twentieth century, can develop connection problems over time that show up as warm outlets, flickering lights, or breakers that trip without an obvious cause.
Not all of it needs to be replaced. A thorough inspection identifies what is actually causing a problem and what is functioning safely. We do not recommend a full rewire when a targeted repair or a connection correction is the right answer. Work is carried out by licensed electricians who will tell you what they found and what it means before any work begins.
For landlords, outdated wiring is often what surfaces during a pre-tenancy inspection or a code compliance review. We can walk through what remediation looks like and what it involves, so you are not making decisions without a clear picture. We show up, and we keep you posted until the job is done.
the wiring services page explains how the work is handled.
Electrical problems don't wait, and neither do we, which is why same-day service is often available when you call between 6:00 AM and 10:00 PM. For situations that will not keep, such as a sparking outlet, a burning smell near a panel, or a circuit that has gone out in an occupied unit, let us know when you call and we will prioritize accordingly.
For tenants in rental properties, we work around occupancy. The goal is to get the problem resolved without requiring the unit to be empty for longer than the job actually takes. For businesses that need to stay operational, we talk through the scope before we start so you know which circuits will be affected and for how long.
We confirm timing on the call and let you know what to expect before anyone heads out. Reach out and an electrician will follow up.
Hawthorne's mix of housing types means one call is rarely like another. A single-family home, a multi-unit rental building, and a commercial space each generate different electrical needs, and the right approach depends on the situation.
A dead outlet, a tripped breaker that will not reset, or lights that flicker when an appliance kicks on are all symptoms of something that needs to be traced back to its source. We test the circuit, check connections, and look at the panel before recommending a fix. GFCI and AFCI protection gets checked in required locations as part of any repair visit, because a single fault can point to a broader issue elsewhere in the home.
A panel that is full, a service that cannot carry the load, or a home being prepared for an EV charger circuit or a solar and battery backup system are all situations that lead to panel or service upgrade work. We assess what the property actually needs, run a load calculation, and confirm the scope before anything is scheduled. The service page carries the full breakdown of what a panel or service upgrade involves.
Ceiling fan installation, recessed and LED lighting, EV charger circuits, arc-fault and ground-fault breakers, and dedicated circuits for major appliances all fall under installation work. These calls come from homeowners updating a room, landlords bringing a unit up to code, and businesses adding capacity for new equipment. Code-compliant wiring on every job means the work will pass inspection and hold up over time.
Fast diagnosis. Honest pricing. Clean work.
We serve Hawthorne and the surrounding area throughout Los Angeles County, including Del Aire, Lennox, Lawndale, Alondra Park, and West Athens. Whether the job is in a single-family home, a multi-unit rental property, a commercial building, or an outbuilding on a larger lot, we cover the area and same-day service is often available.
If you are not sure whether we reach your address, call (747) 368-2289 and we will confirm on the spot. We handle work across the area and are available every day from 6:00 AM to 10:00 PM.
Pick up the phone and we'll get rolling.
We schedule commercial work at times that minimize disruption to operations. That might mean early morning, evening, or weekend scheduling depending on when the business is quietest. We discuss the timing when we scope the job and confirm the schedule before anything is booked.
Yes. When cutting into a wall is not an option, such as in a tiled bathroom, a masonry wall, or a rented space where the landlord does not permit it, surface-mounted conduit or trunking is a code-compliant way to run new wiring. We explain the options and what each one looks like before the job begins.
Yes, and multi-unit work is a regular part of what we do in this area. We handle everything from single-circuit repairs in an occupied unit to full panel upgrades and code compliance work across a building. Property managers can call to talk through the scope before scheduling, and we work around tenants where possible.
Outdoor outlets in wet or damp locations require GFCI protection and weatherproof covers rated for the exposure. Outlets near a pool or pond are also subject to specific clearance requirements under the electrical code. We install to those requirements and confirm the installation is correct before we leave.
The utility controls the portion of the supply from the street to the meter. We handle everything from the meter base into the home, including the service entrance conductors, the main disconnect, and the panel. When the utility's involvement is required, we explain what needs to happen on their end and what we handle on ours.
A workshop with power tools, compressors, or welding equipment typically needs dedicated circuits sized for the load of each major tool, and sometimes a subpanel to distribute that load cleanly. Standard 15-amp or 20-amp outlets are not adequate for equipment that draws heavy startup current. We calculate what the space needs and wire it accordingly.
We run a load calculation based on what the panel is currently serving and what the new load will add. That tells us whether the existing service has the capacity to handle the addition or whether a service upgrade is needed first. Adding load without checking capacity can cause repeated tripping or create a fire risk.
Call and describe what the unit needs, whether that is a code compliance review, GFCI protection in required locations, a panel check, or specific repairs. We give you a price on the call before anything is scheduled, confirm timing, and carry out the work with code-compliant wiring throughout. If we find something during the visit that was not part of the original scope, we tell you before continuing and confirm the revised price.
It depends on what was done and whether it can be brought to code without starting over. Some amateur work can be corrected at the connection points and made safe. Other installations have to come out because the wiring method, the wire gauge, or the routing does not meet current code. We assess it honestly and explain what the options are.
If you have an electrical problem in Hawthorne that needs attention, or a project you are ready to schedule, Coleman Electrical Service is the call to make. We answer when you call, we confirm the appointment window before the visit, and we explain what we find before any work begins. Call (747) 368-2289 for a quote. We're available every day from 6:00 AM to 10:00 PM, and same-day appointments are often available.
Neighboring towns we serve: Inglewood, Torrance, Culver City, Florence-Graham, Huntington Park.
Browse our map of areas.
Below is a plain-language look at the electrical services we handle across Hawthorne and the surrounding San Fernando Valley. Each row covers what the service includes, who it fits best, and a practical note to help you figure out where to start. Call for a quote and we will walk you through the details before anything is scheduled.
| Service Type | Scope of Work | Best For | Things to Know |
|---|---|---|---|
| Hot-Tub Circuits | 240-volt dedicated circuit, GFCI disconnect installation, outdoor wiring and conduit, bonding and grounding | Homeowners installing a spa or hot tub and needing the electrical side handled correctly | Hot tub wiring involves specific code requirements for GFCI protection and bonding. Getting it right the first time avoids problems at inspection. |
| Breaker & Fuse Repair | failing breaker replacement, fuse panel evaluation, overcurrent protection checks, panel interior inspection | Homeowners with a breaker that trips repeatedly or will not reset | A breaker that keeps tripping is doing its job, but the underlying cause still needs to be found and corrected. |
| Standby Battery for Outages | battery backup wiring, transfer switch installation, critical load panel setup, grid-tie and off-grid configurations | Homeowners who want power for essential circuits when the grid goes down | Sizing the battery correctly starts with knowing which circuits you need to keep running. We work through that on the call before anything is scheduled. |
| Electrical Repairs & Troubleshooting | tracing faults to the source, testing outlets and circuits, arcing and loose connection repair, GFCI and AFCI protection | Any home or business with a symptom that needs a diagnosis | A tripping breaker or dead outlet can point to something deeper. We identify the real problem before recommending a fix. |
| Outlet & Switch Installation | GFCI outlet installation, switch replacement and upgrade, dedicated outlet runs, exterior and weatherproof outlets | Homeowners adding outlets or replacing devices that have stopped working | GFCI protection is required by California code in kitchens, bathrooms, garages, and outdoor locations. We install to current code on every job. |
| Older-Home Rewiring | knob-and-tube replacement, aluminum branch-circuit remediation, partial and whole-home rewires, wiring for additions and remodels | Owners of older Hawthorne properties with wiring that has been flagged or is showing symptoms | The scope of a rewire depends on what is actually in the walls. We assess the existing wiring before recommending a full or partial approach. |
| Whole-Home Surge Protection | panel-mounted surge protector installation, grounding and bonding verification, protection for appliances and electronics, EV charger circuit protection | Any home with sensitive electronics, an EV charger, or solar equipment worth protecting | A surge protector at the panel intercepts voltage spikes before they reach your devices. Grounding and bonding are checked as part of the installation. |
| Wiring & Circuit Installation | new circuit runs, renovation and addition wiring, garage and shed wiring, code-compliant rough-in work | Additions, conversions, and any space being built out or rewired | New wiring in California is inspected to code. We handle the load calculation and panel capacity check as part of the project. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, panel replacement, subpanel installation, load calculations and grounding | Older homes, properties under renovation, or any panel flagged during an inspection | Many Hawthorne homes were built with 100-amp service. A load calculation before the upgrade confirms the new panel can carry what you are adding. |
| Electrical Safety Inspections | panel and wiring condition review, GFCI and AFCI check, grounding and bonding evaluation, pre-sale and rental unit inspections | Landlords, buyers, sellers, and anyone with an older property | A written summary of findings comes with every inspection so you know exactly what was found and what, if anything, needs attention. |
| Dedicated Appliance Circuits | dryer and range circuits, hot tub and spa wiring, workshop and garage circuits, disconnect and breaker installation | Any high-draw appliance that needs its own breaker and wire run | Running a dedicated circuit means the appliance does not compete with other loads on the same breaker, which reduces nuisance tripping and wear. |
| Lighting Installation | recessed and LED lighting, kitchen and bathroom lighting, exterior and security lighting, landscape lighting circuits | Remodels, new construction, or any space where the existing lighting is not working for the room | Exterior and landscape lighting circuits need proper weatherproofing and grounding. We handle the circuit run, not just the fixture. |
| Solar & Battery Backup | transfer switch installation, battery backup wiring, panel capacity and interconnection work, critical load circuit setup | Homeowners adding solar or battery storage, especially ahead of wildfire season outages | Public-safety power shutoffs across Los Angeles County have made battery backup a practical choice. We handle the electrical side so the system actually works when the grid goes down. |
| Ceiling Fan Installation | fan and fixture swap, new circuit and wiring runs, box and brace installation, switch and remote wiring | Homeowners replacing an old fan or adding one where no wiring exists | If there is no existing wiring at the ceiling location, we run the circuit from the panel. No guesswork on whether the box can hold the weight. |
| EV Charger Installation | Level 2 charger installation, dedicated 240-volt circuit, panel capacity check, garage and driveway placement | Electric vehicle owners who need faster overnight charging than a standard outlet provides | California has some of the highest EV adoption in the country. If the panel needs room for the new circuit, we handle that as part of the same visit. |
Call (747) 368-2289 for a quote on any of the services above. We are available every day from 6:00 AM to 10:00 PM, and we will walk you through the details before anything is scheduled.
(747) 368-2289