Replacing a dead outlet and rewiring a house are the same trade, handled by the same electrician, and neither one is too small or too large to be worth a call. We cover residential and commercial electrical work throughout Marina del Rey and the surrounding communities, from a single switch that stopped responding to a full service-entrance upgrade. Whatever the job turns out to be, the process starts the same way: a call, a clear scope, and a price before anything is scheduled.
Marina del Rey is a compact coastal town with a mix of condominiums, apartments, and smaller residential buildings, and the electrical work that comes out of it reflects that. Property owners and landlords who manage units in multi-story buildings, residents dealing with aging circuits in older condos, and business owners who need reliable power for a commercial space all call us for the same reason. We handle the full range of electrical repair and installation, and we are available every day from 7:30 AM to 9:30 PM.
Call (747) 368-2289 to get started.
Not every electrical problem starts with a failure. Some of them start with a repair that was done wrong, a circuit that was added without being properly grounded, or a panel modification that passed a visual check but does not hold up under load. When we come across work like that, the first thing we do is understand what is actually there before deciding what to do about it.
Some of it can be corrected without replacing the whole run. A loose connection, an improperly terminated wire, or a device that was installed without a ground can often be addressed at the point of failure. What cannot be corrected is wiring that has been damaged, undersized for the load it carries, or modified in a way that creates an arc-fault or ground-fault risk. That comes out.
We do not make a drama of it, and we do not use what we find as a reason to expand the job beyond what is necessary. If a circuit has a problem that needs to be addressed, we explain what it is, what the risk is if it stays, and what fixing it involves. Clear communication from the first call to the final test is how every job runs. You approve the work before it starts, not after.
Pricing is worked out from the scope of the job, and the scope is confirmed on the call. Three things move a quote more than anything else: what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry whatever change is being made.
A panel that is already at capacity changes the scope of adding a new circuit. A wall that has to be opened to trace a fault changes it differently than a fault that is accessible at the outlet. A service-entrance upgrade involves different work than a subpanel installation. None of those are surprises if the job is scoped properly on the front end, and that is what the call is for.
You get the rate before anything is scheduled. What the job covers is explained up front, and if something changes once the wall is open or the panel is pulled, we explain that before the work continues. No guesswork. No shortcuts. No loose ends. Where a Marina del Rey job fits is easier to see on our page of electrical services.
An outdoor outlet that has lost its cover, a GFCI that trips every time it rains, or a patio receptacle that was never properly weatherproofed in the first place are all jobs worth addressing before a fault develops. Exterior outlets require weatherproof enclosures and GFCI protection by code, and the enclosure type depends on whether the outlet is in a covered or exposed location. We install and replace outdoor outlets and enclosures, and we verify that the circuit feeding them is correctly grounded and that all connections meet code.
High-draw equipment pulls more current than a standard 20-amp circuit can reliably deliver. A welder, an air compressor, or a larger shop tool typically needs a dedicated 240-volt circuit sized to the equipment's actual load. We do a load calculation before pulling wire so the circuit is sized correctly, and we install the outlet type the equipment requires. Running a circuit that is too small for the load is how breakers wear out before they should.
A three-way switch that works from one location but not the other, a multi-location dimmer that flickers when it is adjusted, or a stairwell light that can only be controlled from one end of the run are all wiring problems, not switch problems. The fix depends on what the existing wiring actually is, which is not always what the original installation suggests. We trace the circuit, identify where the control failure is, and wire it correctly.
An outlet that has stopped holding a plug, a switch that buzzes when it is on, or a room that needs an additional receptacle are among the most common calls we take. GFCI outlets are required in bathrooms, kitchens, garages, and exterior locations. AFCI protection addresses arc-fault conditions in bedroom circuits and other living spaces. We install both where the code requires them and where the existing installation is missing them.
In Marina del Rey's building stock, the main panel is most often in a utility closet, a garage, or a dedicated electrical room in a common area of a multi-unit building. In older condominiums, individual unit panels are sometimes in a hallway closet or tucked behind a door that is easy to miss. Knowing where it is before we arrive saves time, and if you are not sure, a photo sent in advance helps.
Clear access to the panel is the single thing that makes a visit go faster than anything else. If the panel is behind stored items, clearing a path before the appointment means the diagnostic or installation starts sooner. For outlet and switch work, moving furniture or appliances away from the wall at the relevant locations helps the same way.
Homes across this area have every kind of panel and circuit in them. An older condo might have a panel that has been modified several times over the years, with breakers from different manufacturers and circuits that are not labeled accurately. Telling us what you know about the panel's history on the call helps us come prepared. One call and we are on it.
We are available every day from 7:30 AM to 9:30 PM. When a problem will not keep, that range covers most of the hours when something is actually discovered and needs to be dealt with. We take short-notice work when the schedule allows, and we confirm what is available on the call rather than leaving it open.
For landlords and property managers, we work around tenant schedules when the unit needs to stay occupied. For businesses that need to stay open during the work, we talk through what the job involves on the call and plan the visit so the disruption is as limited as the work allows. A circuit that needs to be de-energized for part of the job is a different situation from one that can be worked on with the rest of the building live.
The scope and the price are settled before anything starts. If a job turns out to involve more than the initial call described, that conversation happens before the additional work is done, not after. Reach out and we will get it diagnosed.
We serve Marina del Rey and the neighboring communities throughout Los Angeles County. That includes Santa Monica, Culver City, El Segundo, Ladera Heights, and the broader Los Angeles area. If you are in any of these communities and need electrical work handled, the call is the same and the process is the same.
Coverage means we take the call, scope the job, and schedule the work for your address. It does not matter whether the property is a condo in Marina del Rey or a commercial space in Culver City. Residential wiring. Commercial wiring. One number for both.
Sometimes, yes. If the panel has open slots and the service has available capacity, a new circuit can be added without touching the main service. We check the load on the panel before confirming that, because adding a circuit to an already-loaded panel is not always safe.
Yes. Surface raceway runs along the wall or baseboard and carries the wiring without opening the wall. It is a practical option in finished spaces where cutting and patching would be disruptive, and we can discuss whether it suits the situation when you call.
We work on condominiums, apartments, smaller residential buildings, and commercial properties throughout the town. Whether the job is in a single unit, a common area, or a commercial space, the process is the same: call with the details and we scope it from there.
They can be. A photo of the panel label and the breaker layout helps us understand the service size and what slots are available before we arrive. It does not replace a proper assessment on the day, but it gives us a clearer starting point for the call.
A Level 2 EV charger requires a dedicated 240-volt circuit run from the panel to the parking or garage location. In a multi-unit building, that involves checking both the unit's panel and the building's overall service capacity. We confirm what the panel can support before any wiring starts and handle the circuit from the panel to the charger location.
Yes. Work in common electrical rooms or shared utility spaces is part of what we do for multi-unit properties. We coordinate with whoever controls access to those areas before the visit so the job can proceed without unnecessary delays.
We check the panel, the wiring, the outlets, the switches, and the grounding and bonding throughout the property. The goal is to identify anything that does not meet current code or that presents a safety concern, and to explain each finding clearly so you know what needs attention and what does not.
We answer, we turn up, and we explain what we find before any work starts. That is the whole of it.
Call (747) 368-2289 to reach us.
We are available every day from 7:30 AM to 9:30 PM. Tell us what you are dealing with and we will tell you what the job involves and what it will cost. We are straightforward to deal with from the first call to the last.
Also serving the towns around: Ladera Heights, View Park-Windsor Hills, Del Aire, Alondra Park, Rolling Hills Estates.
View our full area list.
We handle the full range of electrical repair and installation work in Marina del Rey and throughout Los Angeles County. The table below lays out what each service covers, who it fits best, and a practical note to help you think through the job before you call. Every row is a service we schedule regularly, and every job starts with a straight conversation about what is involved and what it costs.
| Type of Work | What the Job Involves | Ideal For | Good to Know |
|---|---|---|---|
| Electrical Panel Upgrades | 200-amp service upgradesFuse-to-breaker conversionsSubpanel installationLoad calculation and sizing | Homes with older panels, fuse boxes, or panels running at or near capacity | A load calculation is part of every panel upgrade we complete so the new service is sized to what the property actually needs. |
| Outlet & Switch Installation | GFCI outlet installationSwitch replacementNew outlet runsAFCI protection | Kitchens, bathrooms, garages, and any room that needs added or updated receptacles | Code requires GFCI protection at outlets in kitchens, bathrooms, garages, and exterior locations regardless of when the home was built. |
| Whole-Home Surge Protection | Panel-level surge device installationGrounding system connectionProtection for all downstream circuitsPost-shutoff surge defense | Homes in areas with grid variability or frequent public-safety power shutoffs | Power restoration after a public-safety shutoff can send damaging voltage spikes through unprotected wiring. A panel-level device catches those spikes before they reach appliances and electronics. |
Call (747) 368-2289 to talk through the job and get a price before anything is scheduled.
(747) 368-2289